Advertisement
U s e r M a n u a l
CAM-3
PRODUCT FEATURES:
Sensor: 1/4" (6.35mm) CMOS
Current Consumption: 106mA @ 13.8V
Resolution: (TV Lines) 480
Minimum Illumination: 0.1 Lux
Angle: 170 Degrees
Effective Pixels: 648 x 488
TV system: NTSC
Video Output: 1.0V p-p 75ohm
Parking Lines: Yes
Working Voltage: DC9-16V (Negative Ground)
Operating Temperature: -30 Degrees C to +65 Degrees C
Waterproof Rating: IP67
Infra-Red LED's: No
Image: Mirror
Enhanced Performance In Low Light: Yes
DISCLAIMER:
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any tech-
nical issues. With this in mind, when contacting Connects2, try to provide as much Infor-
mation as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Rearview CMOS Camera
Pivoting, Surface Mounted (Vertical
Adjustment) with White Housing
Advertisement
Table of Contents
Related Manuals for Connects2 CAM-3
Summary of Contents for Connects2 CAM-3
- Page 1 Connects2 want to provide a fast and suitable resolution should you encounter any tech- nical issues. With this in mind, when contacting Connects2, try to provide as much Infor- mation as possible. This will speed up the process and help us to help you.
- Page 2 6. Using the supplied video cable, connect the camera to the display screen and ensure that the image is displayed correctly. 7. Adjustment of the camera may be required to ensure that the correct angle of the image is achieved. Subscribe to our YouTube Channel for installation guides and tips... www.youtube.com/connects2 www.connects2.com...
Need help?
Do you have a question about the CAM-3 and is the answer not in the manual?
Questions and answers