Humanscale float mini Assembly Instructions Manual page 3

Assembly Instructions
Attach mounting plate to column
1
Assemble the mounting plate onto the column
with the M6x35mm (4) screws using the 4mm hex key provided.
There are 2 locations depending on the preference.
For taller users, optional location is suggested for
more leg room under the table.
Attach work surface
2
Place the work surface upside down on a protective surface.
Secure the mounting plate onto the worksurface with the #10x20mm (9) screws
provided.
Standard location
Optional location
(Bottom view)
Cable exit, this direction
Column
3