VERITAS NetBackup 5330 Hardware Service Procedure page 5

• Standard 1 meter SAS data cables are provided with the Primary Storage Shelf and the Expansion
Storage Shelf. However, optional 2 meter SAS data cables are also available for use with the
storage shelves. The procedures specified in this document can be used with both SAS cable
lengths.
• You can remove and replace SAS data cables with the storage shelves installed in the rack.
• SAS data cable port LNK UP LEDs and LNK FAULT LEDs indicate the status of a SAS data cable
connection.
If either the LNK UP LED is OFF, or the LNK FAULT LED is ON, you should replace the SAS data
cable.
See Figure 3 SAS port LNK indicator LED locations and descriptions.
SAS port LNK indicator LED locations and descriptions
Figure 3
1. USB Connector
2. 1 GbE Management Connector 1
3. 1 GbE Link 1 Fault LED
4. 1 GbE Link 1 Up LED
5. 1 GbE Link 2 Fault LED
6. 1 GbE Link 2 Up LED
7. 1 GbE Management Connector 2
8. SAS Expansion Link 1 Fault LED
9. SAS Expansion Link 1 Up LED
10. SFF-8088 SAS Connector 1 (Expansion)
Requirements
• One or more replacement storage shelf SAS data cables
HSP 151 Storage shelf SAS cable replacement
11. SAS Expansion Link 2 Fault LED
12. SAS Expansion Link 2 Up LED
13. SFF-8088 SAS Connector 2 (Expansion)
14. Standby Power LED
15. Power-Fan DC Power LED
16. Power-Fan Service Action Allowed LED
17. Power-Fan Service Action Required LED
18. Power-Fan AC Power LED
19. Seven-Segment Display
5