Verizon ARC-XCI55AX User Manual page 96

NEtwORk SEttINGS
4. To disable the IPv6 service, move the selector to off
Enable IPv6 Support Enable IPv6 Support field.
5. Click Apply changes Apply changes to have changes take effect.
Once configured using valid IPv6 WAN and LAN configurations, you
should not see any errors when you click on the Apply changes
button and the Basic/System/System Status
Gateway's new IPv6 address.
You should also see the IPv6 address for all IPv6 supported
devices on your local network displayed on the Basic
Devices Devices page by selecting the Settings icon to access the Device
Settings page for that device. Settings
IPv6 WAN with LAN IPv6 Stateless Settings
1. To configure IPv6 LAN Stateless mode with DHCPv6 WAN,
select the Stateless
Controls page as shown below: Controls
Basic/System/System Status page will reflect the
Stateless option on the IPv6 Configuration
off in the
Apply changes
Basic/Devices Devices/
IPv6 Configuration
Device