Verizon ARC-XCI55AX User Manual page 23

WINDOWS 10
1. On the Windows desktop, click on the Start
Settings and click Network & Internet Settings
2. In the Network & Internet, click Ethernet
3. Select Network and Sharing Center Network and Sharing Center. The View your basic
network information and set up connections network information and set up connections window
displays.
4. In the View your active networks View your active networks, click Ethernet
Connections field. The Ethernet Status Connections
5. Click Properties Properties. The Ethernet Properties
6. Select Internet Protocol Version 4 (TCP/IPv4) Internet Protocol Version 4 (TCP/IPv4), then click
Properties. The Internet Protocol Version 4 (TCP/IPv4) Properties
Properties window displays. Properties
7. Click the Obtain an IP address automatically
8. Click the Obtain DNS server address automatically
button, then click OK
9. In the Local Area Connection Properties Local Area Connection Properties window, click OK
save the settings.
10. To configure Internet Protocol Version 6 (TCP/IPv6) to
use dynamic IP addressing, repeat steps 1 to 9. However
for step 6, select Internet Protocol Version 6 (TCP/
IPv6) IPv6) in the Properties
Verizon Internet Gateway configuration).
http://support.verizon.com/router
Network & Internet.
Ethernet Status window displays.
Ethernet Properties window displays.
Internet Protocol Version 4 (TCP/IPv4)
Obtain an IP address automatically radio button.
Obtain DNS server address automatically radio
OK.
Internet Protocol Version 6 (TCP/
Properties option (refer to IPv6 section for
02 / CONFIGURING YOUR
VERIZON INTERNET GATEWAY
Start icon. Select
Ethernet.
View your basic
Ethernet in the
| ©2022 Verizon. All Rights Reserved
23
OK to