Verizon ARC-XCI55AX User Manual page 7

GETTING TO KNOW YOUR VERIZON
INTERNET GATEWAY
1.1a/ RESET bUTTON
If you experience difficulties with your router or you want to revert
all settings that you have changed, the reset function allows you
to reset the router back to its factory default state. To perform a
factory reset and return the Verizon Internet Gateway to default
settings, press and hold the reset button for 3+ seconds. The LED
will flash yellow to indicate a reset has been triggered, followed by
fading in/out (white) while the router restarts.
1.1b/ WPS
WPS is an easy way to add supported Wi-Fi devices to your
network. Press the WPS button on the back of the Gateway to
activate WPS. You will need to activate WPS on your Wi-Fi device
too. Refer to "3.1d/ Wi-Fi Protected Setup (WPS)" on page 42.
1.1c/ LED
The LED indicates the system and connection status, and WPS
activity.
Front LED Mode
Bootup
Status
System Off
System Booting
Firmware update
(FOTA)
LED Pattern
Off
Soft Blink White
Fast Blink White