Verizon ARC-XCI55AX User Manual page 22

COmpUtER NEtwORk CONFIGURatION
2.1a/ CONFIGURING DYNAMIC IP ADDRESSING
To configure a computer to use dynamic IP addressing:
WINDOWS 7/8
1. In the Control Panel, locate Network and Internet
View Network Status and Tasks View Network Status and Tasks.
2. In the View your active networks – Connect or disconnect View your active networks – Connect or disconnect
section, click Local Area Connection
field. The Local Area Connection Status window displays.
3. Click Properties Properties. The Local Area Connection Properties
window displays.
4. Select Internet Protocol Version 4 (TCP/IPv4) Internet Protocol Version 4 (TCP/IPv4), then click
Properties. The Internet Protocol Version 4 (TCP/IPv4) Properties
Properties window displays.
5. Click the Obtain an IP address automatically
6. Click the Obtain DNS server address automatically
button, then click OK
7. In the Local Area Connection Properties window, click OK
save the settings.
8. To configure Internet Protocol Version 6 (TCP/IPv6) to
use dynamic IP addressing, repeat steps 1 to 7. However
for step 4, select Internet Protocol Version 6 (TCP/
IPv6) in the Properties IPv6)
Verizon Internet Gateway configuration).
Local Area Connection in the Connections
Obtain an IP address automatically radio button.
Obtain DNS server address automatically radio
OK.
Internet Protocol Version 6 (TCP/
Properties option (refer to IPv6 section for
Network and Internet, then select
Connections
OK to