Verizon ARC-XCI55AX User Manual page 48

To view and configure the channel settings:
1. From the Advanced
Management Management.
2. Click on Settings
Management page to configure the channel scan settings: Management
• Select the Keep my channel selection during power cycle
check box to save your channel selection when your
Verizon Internet Gateway is rebooted.
• Enable DFS channels during channel scan Enable DFS channels during channel scan: DFS channels
are enabled by default during channel scans.
Note: DFS channels are a subset of the 5 GHz network that
is shared with radar systems. Some consumer devices do
not support these channels and cannot connect to gateways
using them. Examples include some media streaming devices.
Disabling this feature will allow the Gateway to select the best
available channel to broadcast on and allow these devices to
connect.
• Press Apply Changes
http://support.verizon.com/router
Advanced menu, select Wi-Fi
Settings on the top right-hand side of the Radio
Keep my channel selection during power cycle
Apply Changes to save the changes.
03 / WI-FI SETTINGS
Wi-Fi and then click Radio
| ©2022 Verizon. All Rights Reserved
48
Radio
Radio