457 ROUTE 422 EAST ?
AIR-EAGLE
R.F. Transmitter
MULTI CONTACT INPUT
MODEL 44-1000-PI
DESCRIPTION
The model 44-1000-PI, A
-E
IR
AGLE
transmitter designed to transmit unique signals to the model 44-2000-PI A
E
XLT R
. This model is specifically designed to interface with a
AGLE
ECEIVER
relay output card for activating remote lightning warning beacons. This unit
features a test button for transmitting a test signal to all receivers which
insures signal integrity.
DIMENSIONS & INDICATORS
Top View
CH1
CH2
6.30"
Test
Input
Side View
CH1 LED - Yellow LED illuminates continuously when the
yellow warning beacon contacts are closed.
CH2 LED - Red LED illuminates continuously when the red
warning beacon contacts are closed.
CH3 LED – Green LED illuminates continuously while the test
button is being depressed.
TEST PUSHBUTTON – A momentary pushbutton used to send a
transmit a test signal to the receiver.
BUTLER, PA 16002 ?
®
XLT
XLT TX
a multi contact input R.F.
IS
CH3
5.50 "
PRODUCT INFORMATION
724-283-4681 ?
( FAX) 724-283-5939 ?
PC BOARD SET-UP INFORMATION
NSW1
1
-
IR
2
amp
Make the following connections on the PC Board Terminal Strip:
DC INPUT TERMINAL STRIP (DC IN)
Terminal 1
Terminal 2
INPUT 1 TERMINAL STRIP (INP1)
Terminal 1
Terminal 2
Terminal 3
Terminal 4
I/O TERMINAL STRIP (TERM2)
Terminal 1
Terminal 2
NETWORK SWITCH TERMINAL STRIP (NSW1)
Terminal 1
Terminal 2
NETWORK SWITCH CONFIGURATION OPTIONS (SEL1)
SW #
SW1
SW2
SW3
SW4
BULLETIN
www.bwieagle.com
2
Closed
SEL1
Open
Dc Power Input Module
DC IN
INP1
TERM2
+ -
1
2
3
4
1
Positive (+) 12VDC INPUT from 120VAC adapter
Negative (-) 12VDC INPUT from 120VAC adapter
CH1 Dry Contact Input (+)
CH1 Dry Contact Input (Common)
CH2 Dry Contact Input (+)
CH2 Dry Contact Input (Common)
CH3 Test Switch Input (+)
CH3 Test Switch Input (Common)
Not Used On This Model
Not Used On This Model
OPEN
Not Used
Not Used
Not Used
Not Used
2
3
4
CLOSED
Not Used
Not Used
Not Used
Not Used