BWI Eagle AIR-EAGLE XLT Manual
900 mhz rf transceiver
Hide thumbs
Also See for AIR-EAGLE XLT:
- Manual (10 pages) ,
- Product information bulletin (4 pages) ,
- Product information bulletin (3 pages)
Related Manuals for BWI Eagle AIR-EAGLE XLT
Summary of Contents for BWI Eagle AIR-EAGLE XLT
- Page 1 AIR-EAGLE XLT 441-6000-DC 900 MHz RF Transceiver Document Date: 5/16/2023 Product Rev: 5...
-
Page 2: Warranty Statement
441-6000-DC WARRANTY STATEMENT BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and installed, will be free from defects in material and workmanship for a period of 1 year after date of purchase. Said warranty to include the repair or replacement of defective equipment. This warranty does not cover damage due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing. -
Page 3: Installation
441-6000-DC INTRODUCTION The Air-Eagle XLT is an RF system designed for long range wireless remote control of electrical apparatus in a variety of industrial applications. This transceiver is a dual I/O unit designed to transmit and receive unique signals from an identical unit. -
Page 4: Terminal Strip Wiring
441-6000-DC TERMINAL STRIP WIRING Terminal 1 Negative (-) 9-36VDC Terminal 2 Positive (+) 9-36VDC Terminal 3 CH1 Dry Contact Input (Common) Terminal 4 CH1 Dry Contact Input Terminal 5 CH2 Dry Contact Input (Common) Terminal 6 CH2 Dry Contact Input Terminal 7 CH3 Dry Contact Input (Common) Terminal 8... - Page 5 441-6000-DC RELAY, REPEATER, & FREQUENCY SETUP The unit is shipped from the factory RELAY CONFIGURATION with SEL1 switches in the open positions. All relays will operate as SEL1 OPEN (default) CLOSED maintained momentary, repeater mode is turned off, and the unit is sending Relay #1 momentary Relay #1 toggle/latch and receiving commands on frequency...
-
Page 6: Controls And Indicators
441-6000-DC CONTROLS & INDICATORS Dual color LED illuminates red while unit is booting up, changes to POWER/TX green when boot-up is successful and unit is ready to operate. LED3 If this LED fails to turn green, power unit off for 15-20 seconds, then reapply power. -
Page 7: Specifications
STANDARD ANTENNA (INCLUDED) 900MHz TNC Portable “Rubber Duck” Antenna 49-1103 MOBILE/BASE ANTENNAS (OPTIONAL) Used to help achieve max range in non-line-of-sight and line-of-sight applications. Contact BWI Eagle for recommendations. 900MHz Thru-Hole/Bracket Mount Mobile Antenna 49-2101 900MHz Magnet Mount Mobile Antenna 49-2102... - Page 8 441-6000-DC DIMENSIONS...