Packing List; Mounting; Select Mounting Location - Goodwe ET Series User Manual

Installation Instructions
Backup
Load
The Inverter does not support off-grid
functions in gridless areas.
Generator
Backup On-Grid
The on-Grid or backup side cannot
be connected to any AC generator
directly.

2.2 Packing List

Upon receiving the hybrid inverter, please check if any of the components as shown below are
missing or broken.
Wall-Mounting
Inverter
PIN
AC Cover Terminal
Note: The COM Connector is for ET Plus Series only. Make sure that the connector is installed
correctly no matter you need the communication function or not.

2.3 Mounting

2.3.1 Select Mounting Location

For inverter's protection and convenient maintenance, mounting location for inverter should be
selected carefully based on the following rules:
Rule 1. Any part of this system shouldn't block the switch and breaker from disconnecting the
inverter from DC and AC power.
Rule 2. Inverter should be installed on a solid surface, where it is suitable for inverter's dimensions
and weight.
Rule 3. Inverter should be installed vertically with a max rearward tilt of 15°.
One meter cannot be connected
to multiple inverters. Different CTs
cannot connect to the same line cable.
Incompatible battery
The inverter battery input must not be
connected to incompatible batteries.
Smart Meter with 3CT
Bracket
Spare PE Expansion
Screw Terminal Bolts
User Manual V1.2-2022-03-30
Smart Meter
Battery
One battery bank cannot be
connected to multiple inverters.
Backup
Battery
The backup side cannot be connected
to the grid.
or
&
PV Connectors
Bluetooth COM
(Optional) Module
6
On-Grid
& &
BAT
Connectors
COM
Documents
Connector