Safety And Warning - Goodwe ET Series User Manual

Product Introduction

1.2 Safety and Warning

The ET series and ET Plus series of inverters from GoodWe Technologies Co., Ltd. (also called
GoodWe) strictly complies with related safety rules for product design and testing. Please read
and follow all of the instructions and cautions appearing on the inverter or in the User Manual
during installation, operation and maintenance, as any improper operation might cause personal
injury or property damage.
WARNING!
Symbol Explanation
Caution!
Failure to observe any warnings contained in this manual may result in injury.
Danger - high voltage and electric shock!
Danger - hot surface!
The components of the product can be recycled.
This side up! This package must always be transported, handled and stored in such
a way that the arrows always point upwards.
No more than six (6) identical packages being stacked on each other.
Products shall not be disposed as household waste.
Fragile - The package/product should be handled carefully and never be tipped over
or slung.
Refer to the operating instructions.
Keep dry! The package/product must be protected from excessive humidity and
must be stored under cover.
This symbol indicates that you should wait at least 5mins after disconnecting the inverter
from the utility grid and from the PV panel before touching any inner live parts.
5min
CE mark.
These servicing instructions are for use by qualified personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that specified in the operating instructions.
Ces instructions d'entretien sont destinées uniquement au personnel
qualifié. Pour réduire le risque de choc électrique, n'effectuez aucun
service autre que celui spécifié dans les instructions d'exploitation.
User Manual V1.2-2022-03-30
2