Memory; Procedure 1 Test Program Check - dynabook Satellite C40-J Hardware Overview

2.7 Memory

2.7 Memory
To check if the computer's Memory Module is defec�ve or malfunc�oning, follow the
troubleshoo�ng procedures below as instructed.
Procedure 1: Test Program Check
Procedure 2: Connector Check and Replacement Check
Procedure 1: Test Program Check
Execute Memory Test Program available as part of the maintenance test program. This test
program checks the memory module. Insert the diagnos�cs USB Memory into the computer's
USB Port, turn on the computer and run the test. See Chapter 3 for informa�on on how to
perform the test.
SATELLITE PRO C40-J/C50-J Maintenance Manual
2 Troubleshooting
2-13