Bluetooth Audio - Chevrolet Low Cab Forward 6.7L 2022 Owner's Manual

90 Infotainment System
3. Turn MODE/ /ENTER to select AUX,
and then press ENTER.
Connecting a mini plug cable to the Mini
jack also establishes the AUX mode and
enables you to use the portable audio
device.
When the mini plug cable is disconnected
from the main unit, the AUX mode is
cancelled.
Adjusting the Volume
Turn the Volume adjust knob clockwise or
counterclockwise to adjust the volume.
Turn clockwise: Increase the volume.
Turn counterclockwise: Decrease the
volume.
Warning
Either place the portable audio device
and mini plug cable somewhere where
they do not interfere with driving or
temporarily secure them at a location
where they are not in the way. They
could impede driving and cause a
crash.
Make sure not to touch the terminals
of the mini plug cable.
Warning (Continued)
Do not connect, adjust or remove the
portable audio device while driving.
The volume set by adjustment in the AUX
mode is effective in the AUX mode only.
To power the portable audio device, use the
battery or other power source supplied with
the device.
The AUX device cannot be controlled from
the main unit.
Reduce the AUX volume to prevent speaker
damage.

Bluetooth Audio

Bluetooth Audio Operation
Connecting a Bluetooth compatible audio
player or mobile phone to this unit allows
you to operate it from the system and
listen to music.
In addition, as the connection between the
unit and the portable device is wireless,
users will not face problems associated with
cable connections.
(Continued)
This unit supports Bluetooth. Bluetooth is a
wireless data system which allows users to
listen to music without the need to connect
the portable device with wires.
If the portable device is not
Bluetooth-compatible, this function is not
available.
Do not connect the portable device while
driving.
Do not leave the portable device inside the
vehicle. (The interior of the vehicle may
become too hot under extreme hot
weather.)
Do not set the portable device too close to
this unit. When the device and the unit are
too close to each other, sound quality may
deteriorate and connection problems may
arise.
Playing Music
1. Press MODE/ /ENTER.
2. Turn MODE/ /ENTER to select
BT-AUDIO, and then press ENTER.
The music on the Bluetooth compatible
device that is connected will start.
When the registered device is not
connected, NO CONNECT is displayed.