Chevrolet Low Cab Forward 6.7L 2022 Owner's Manual page 29

28 Seats and Restraints
restrains the occupant during forward force
caused by the occupant's body following a
strong shock.
To Fasten:
1. Sit on the seat in the correct driving
position.
2. Pull out the seat belt holding the latch
plate. After checking that there are no
twists in the belt, insert the latch plate
into the buckle until it clicks. If the
retractor locks before the latch plate
reaches the buckle, let the belt retract
slightly, then withdraw it slower than
before.
3. To reduce the risk of sliding under the
belt during a collision, position the belt
across your lap as low on your hips as
possible and adjust it to a snug fit by
pulling the "shoulder" portion upward
through the latch plate.
The lap-shoulder belt is designed to lock
during a sudden stop or impact. At other
times it should move freely.
If you cannot pull out the seat belt, let it
go loose, and then slowly pull it out
again. If you still cannot pull it out, give
the seat belt one strong pull, let it go
loose, and then slowly pull it out again.
To Unfasten:
Push the button on the buckle. As the belt
automatically retracts, let it be taken up
slowly by holding on to the latch plate until
the belt is fully retracted.
While being automatically retracted, the
seat belt could damage a nearby window or
interior trim unless the latch plate is
properly held. Hold the latch plate to ensure
that the belt is taken up slowly.
Before closing the door, check that the
retracted seat belt is taut. A slack belt could
become trapped in the door or seat rail.