Chevrolet Low Cab Forward 6.7L 2022 Owner's Manual page 179

178 Driving and Operating
to drive with the set speed automatically
maintained without using the accelerator
pedal.
At the same time the cruise set indicator
light comes on.
Accelerating during Cruise Control Driving
If you want to accelerate temporarily to
pass another vehicle while driving using the
cruise control, press the accelerator pedal.
When you release the accelerator pedal, the
speed returns to the original set vehicle
speed.
When Increasing Vehicle Speed
When the cruise control resume switch is
operated, the speed increases while the
switch is held.
After the speed is increased to the desired
vehicle speed, and the switch is released,
the speed is set at the increased vehicle
speed. If you want to increase the speed
quickly, press the accelerator pedal and
accelerate to the desired vehicle speed.
Then, operate the cruise control set switch.
When Increasing Vehicle Speed Slightly
If the cruise control resume switch is
operated and released immediately, the set
vehicle speed increases 1.6 km/h (1MPH) per
operation. This operation can be performed
10 times consecutively.
When Decreasing Vehicle Speed
When the cruise control set switch is
operated, the speed decreases while the
switch is held.
After the speed is decreased to the desired
vehicle speed, and the switch is released,
the speed is set at the decreased vehicle
speed. If you want to decrease the speed
quickly, press the brake pedal to cancel