Chevrolet Low Cab Forward 6.7L 2022 Owner's Manual page 61

60 Instruments and Controls
warning disappears after the engine has
started, there is no problem with the
battery voltage.
Calendar and Clock
{
Warning
The calendar and clock can be set only
while the vehicle is stationary. When
setting the calendar or clock, park your
vehicle in a safe place where stopping or
parking is permitted and that is well clear
of traffic.
Press the DIC selector once or more to select
the calendar. Press and hold the DIC selector
to enter the clock setting screen. The year
segment will flash. Turn the DIC selector
clockwise or counterclockwise to increase or
decrease the year. While in the year setting
screen, press the DIC selector once to switch
to the month setting screen. The month
segment will flash. Use the same method to
set the month. While in the month setting
screen, press the DIC selector again to
switch to the day setting mode. Adjust the
day using the selector.
Press and hold the DIC selector to complete
the calendar setting. When complete, the
normal calendar display will resume. Use
this same method to set the hour and
minute when in the clock setting screen.
Dimmer
The brightness of the DIC can be adjusted
while the light control switch is off. Select
this screen and turn the DIC selector
clockwise or counterclockwise to brighten or
dim the illumination. The brightness is
linked to the adjustment of the instrument
panel light level control while the light
control switch is on. See Instrument Panel
Illumination Control 0 70.
Warning Lights and Messages
Engine Overheat Warning Light
Low Coolant Warning Light
Water Separator Warning Light
Air Cleaner Light
Low Fuel Warning Light
Regeneration Warning Lights
Exhaust System Warning Light
Refill DEF Warning Light
DIC Errors
Maintenance Data
Hour Meter
See Vehicle Messages 0 61.
Maintenance Data Functions
Display/Not Display the Maintenance Data
Function
Maintenance Light: On the DIC, go to the
Maintenance Indicator Light. Switch the
display by pressing and holding the DIC
selector for more than two seconds. Turn
the DIC selector clockwise or
counterclockwise to switch the display.
Complete the resetting by pressing and
holding the DIC selector for more than
two seconds.
To cancel the setting procedure, press the
DIC selector once. The display will go back
to the previous screen.
Resetting/Setting the Change Interval
(Odometer Reading)
Engine Oil and Filter Light : On the DIC, go
to the engine oil and filter light. Enter the
resetting screen by pressing and holding the
DIC selector for more than two seconds.
Complete the resetting by pressing and
holding the DIC selector for more than
two seconds.