Upload Nit To The Devices; Reset The Nit - axing MIE 8-00 Manual

Operation instructions | MIE 8-00 | MIE 16-00 | MIE 32-00 | MIE 4-02 | MIE 8-02 | MIE 3-02 | MIE 6-02
 Click on the plus sign next to the cell.
The line will be adopted.
 Click the wastebasket icon next to a line.
The line is deleted.

4.13.6. Upload NIT to the devices

 Select the devices you want to upload to.
 Click UPDATE.
The data is uploaded and stored in the headend.

4.13.7. Reset the NIT

Resetting the NIT is necessary in certain circumstances.
Example:
Three devices are used.
In the first device, the NIT is edited and uploaded to all devices. Subsequently, in the modulator output of the first device,
parameters such as the channel output frequency are changed. If the NIT is read in again, the old channel output frequency will
also be read in as it is still in device 2 and 3. Resetting removes all previous loaded NIT configurations from the devices. These
now only return their current configured settings while reading.
 Click RESET NIT.
The NIT entries of the devices are reset.
Page 62 of 68 BA_MIE.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2022-05-31
Add cell
Adopt cell
Edit cell
Delete cell