Config; Erasing Service Data; Save Initialization Data - axing MIE 8-00 Manual

The changing of the modulation standard begins, the remaining time ist shown as a countdown.
The device will be automatically rebooted, the enter password dialog will be displayed.
 Enter the password again.
 Check especially the modulator settings and their fill level.
4.4.

Config

4.4.1.

Erasing service data

In the section ERASE SERVICE DATA you can erase the settings of phase 1 and phase 2. The input streams and the selection of
programs are deleted.
 Click on erase.
The frontpage will be shown.
4.4.2.

Save initialization data

In the section SAVE SYSTEM INITILIZATION DATA TO FILE you can save the current initilization data from phase 1 to 3 into a file
on your computer.
 Click on SAVE.
The data will be saved in a file called config.dat at the download folder on your computer.
 Click on PDF TO PRINT.
A PDF will be generated and saved in a file called config.pdf at the download folder on your computer.
Note: Password and IP adress will not be saved.
2022-05-31 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIE.pdf | Page 47 of 68