Operation instructions | MIE 8-00 | MIE 16-00 | MIE 32-00 | MIE 4-02 | MIE 8-02 | MIE 3-02 | MIE 6-02
4.9.2.
Load license file
Licenses can be loaded onto the headend in different ways:
By AXING support via remote maintenance software (e.g. TeamViewer):
–
The headend must be connected to a PC/notebook via
Ethernet.
–
The notebook requires Internet access.
–
You need a valid software license and the current version
of the remote maintenance software.
By the user or AXING support via SMART Portal:
–
The headend must be integrated into the SMART Portal
and requires Internet access.
–
If AXING support should upload the license file, the
option Allow AXING support must be activated for the
headend.
By the user in the configuration interface:
–
You have ordered a software extension and received a
license file by e-mail.
–
You upload the license file (SN.lic) in the configuration
interface of the headend under
MAINTENANCE>LICENSES.
Note: The new function is only available after a restart of the
headend.
Click on LICENCES.
The dialog ACTIVATED LICENSES will be opened.
–
The already activated licenses and their expiration date
are displayed (permanent means that the license never
expires).
Under UPLOAD A NEW LICENSE, select a LICENSE FILE.
Click on UPLOAD.
The upload will take a few seconds.
The new license is listed in the ACTIVATED LICENSES
dialog.
Reboot the device and log in again. The new function is only available after a restart of the headend.
Page 52 of 68
BA_MIE.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2022-05-31