Table of Contents
Advertisement
NLTroubleshooting
Display instructions
Malfunction
Refill softening salt
indicator lights up.
Refill softening salt indicator
does not light up.
Rinse aid refill
indicator lights up.
Rinse aid refill indicator
does not light up.
Malfunctions
Malfunction
Water remains in the
appliance at the end of the
programme.
Device cannot be
switched on or operated.
The device does not start.
58
Cause
There is no softening
salt.
Sensor does not recognize
softening salt tablets.
Water softening is
switched off.
Rinse aid is missing.
Water softening is
switched off.
Cause
Sieve system or space under
the sieve is clogged.
Program has not yet
ended.
Software update in
progress.
Device functions
have failed.
Fuse of the house
installation is not OK.
Power cord is not
connected.
Troubleshooting
▶
Fill in "softening salt"→Page 29 Bee.
Do not use softening salt
▶
tablets.
Set water softening
▶
Fill the "rinse agent"
1.
→
Page 30Bee.
Set the amount of rinse aid.
2.
"Setting the rinse aid
amount", Page 31
Set the amount of rinse
▶
aid.
Troubleshooting
Clean the "seven"→Page 46.
1.
Clean the "drain pump"
2.
→
Page 62.
▶
Wait for the end of the program or
cancel the program withReset off.
"Cancel program",
▶
page 38
▶
Wait for the software update to
complete.
Unplug the appliance from
1.
the mains or switch off the
fuse.
Wait at least 2 minutes.
2.
Connect the device to the
3.
mains.
Turn on the device.
4.
▶
Check the fuse of the house
installation.
Check if the socket is
1.
working.
Advertisement
Table of Contents
