Table of Contents
Advertisement
NLEnvironmental protection and saving
†The rinse aid container can be
softening salt for dishwashers
corrode.
To ensure that spilled softening
▶
salt is rinsed from the rinse aid
container, the softening salt must
be filled into the softening salt
reservoir immediately before the
program starts. †Dishwasher
detergent can damage the water
damage hardening.
Only fill the water softener
▶
reservoir with dishwasher
softening salt.
†Unsuitable dishwasher detergents
can damage the device.
Do not use a steam cleaner.
▶
To avoid scratching, do not use
▶
sponges with a rough surface or
abrasive cleaning agents on the
surface of the device.
To prevent corrosion on
▶
dishwashers with a stainless
steel front, do not use sponge
cloths or rinse them thoroughly
several times before using them
for the first time.
m
environmental protection and
savings
Disposal of the packaging
The packaging materials are
environmentally friendly and can be
reused.
▶ Dispose of the individual components
separately according to type.
12
Save energy
If you follow these directions, your
device will use less power and water.
Use the Eco 50° program.
The Eco 50° program is energy-
saving and environmentally friendly.
→ †Programs", Page 20
Change the sensor setting to
Standard.
The consumption values are
reduced.
→ †Sensors", Page 13
Drying with zeolite automatically
contributes to energy savings.
→ †Drying with zeolite ",
Page 12
Drying with zeolite
The device is equipped with a zeolite
reservoir. Energy can be saved by
drying with zeolite.
Zeolite is a mineral that can store and
release moisture and heat energy.
During the wash phase, heat energy is
used to heat the wash water and dry
the mineral.
During the drying phase, moisture
from the flushing chamber is stored in
the mineral and heat energy is
released. The heat energy is blown out
into the wash cabinet with dry air. This
allows fast and improved drying.
Drying with zeolite is therefore
very energy-saving.
Advertisement
Table of Contents
