Table of Contents
Advertisement
NL Troubleshooting
Malfunction
Rust traces on the cutlery.
There are detergent
residues in the detergent
dispenser or in the tablet
dispenser.
Abnormal foaming
present.
Display instructions
Malfunction
Indication of softening salt with - No softening -
fill is lit.
Indication of softening salt with Water softening is off
filling does not light up.
Rinse aid refill
indicator lights up.
50
Cause
Cutlery also rusts when it
is together with rusty
objects are washed.
Salt content in the washing
water is too high.
The spray arms were
blocked by crockery,
which prevented the
detergent from being
rinsed away.
Dishwasher detergent dispenser laundry
damp when filling the
detergent.
There is hand
dishwashing liquid in the
rinse aid reservoir.
Rinse aid has been
spilled.
Used detergent or
cleaning product
produces too much foam.
Cause
salt.
Sensor does not recognize
softening salt tablets.
switched.
Rinse aid is missing.
Troubleshooting
Do not wash rusting objects
▶
off.
Remove spilled softening salt from
1.
the rinse aid container.
Tightly close the lid of the
2.
softening salt reservoir.
Make sure the spray arms are not
▶
locked and free to rotate.
Only put the detergent in
▶
a dry detergent dispenser.
Fill rinse aid directly into the
▶
reservoir.
→ "Fill rinse aid",
Page 26
Remove the rinse aid with
▶
a cloth.
Use a different brand of dishwasher
▶
resourse.
Troubleshooting
Fill in "softening salt" → Page 24
▶
Bee.
Do not use softening salt
▶
bleed.
Set water softening
▶
Fill the "rinse agent"
1.
→
Page 26 Bee.
Set the amount of rinse aid.
2.
→ "Amount of rinse aid
set", page 26
Advertisement
Table of Contents
