Table of Contents
Advertisement
Filling rinse aid
When the display shows "Please refill
rinse aid", fill
rinse aid. Only use rinse aid for
household dishwashers.
Press and lift the tab on the lid of
1.
the rinse aid reservoir .
Top up the rinse aid up to the max
2.
mark.
If rinse aid has spilled over, it must
3.
be removed from the rinse aid
container.
Rinse aid spilled over can cause
excessive foaming during the wash
cycle.
The lid of the rinse aid
4.
close the reservoir.
aThe lid clicks
2
1
max
orderly fixed.
Set the rinse aid amount
If streaks or water spots remain on the
dishes, adjust the amount of rinse aid.
Press.
1.
Approx. Press for 3 seconds to
2.
access the basic settings.
Press repeatedly until the display
3.
shows "Rinse aid setting".
Press or repeatedly until the desired
4.
amount of rinse aid is set.
– A low setting adds less rinse aid
during the wash cycle, reducing
the streaks on the dishes.
– A higher setting adds more rinse
aid during the wash cycle,
reducing water spots and
improving drying results.
To save the settings, press for
5.
approx. 3 seconds.
Switch off rinse system
If the rinse aid refill indicator bothers
you, e.g. if you use a combined
dishwasher detergent with a rinse aid
component, you can switch off the
rinse system.
Tip:The function of the rinse aid is
limited in combination detergents. You
usually get better results by using
rinse aid.
Press.
1.
Rinse SystemNL
31
Advertisement
Table of Contents
