Table of Contents
Advertisement
NLTroubleshooting
Display instructions
Malfunction
Refill softening salt
indicator lights up.
Refill softening salt indicator
does not light up.
Rinse aid refill
indicator lights up.
Rinse aid refill indicator
does not light up.
Display flashes.
Malfunctions
Malfunction
Water remains in the
appliance at the end of the
programme.
Device cannot be
switched on or operated.
54
Cause
There is no softening
salt.
Sensor does not recognize
softening salt tablets.
Water softening is
switched off.
Rinse aid is missing.
Water softening is
switched off.
Appliance door is not
completely closed.
Cause
Sieve system or space under
the sieve is clogged.
Program has not yet
ended.
Software update in
progress.
Device functions
have failed.
To fix an issue
▶
Fill in "softening salt"→Page 25 Bee.
Do not use softening salt
▶
tablets.
Set water softening
▶
Fill the "rinse agent"
1.
→
Page 27Bee.
Set the amount of rinse aid.
2.
"Setting the rinse aid
amount", Page 27
Set the amount of rinse
▶
aid.
▶
Close the appliance door.
†
Arrange the crockery in such a
way that no crockery parts
protrude over the crockery
basket and prevent the
appliance door from closing
properly.
To fix an issue
Clean the "seven"→Page 42.
1.
Clean the "drain pump"
2.
→
Page 57.
▶
Wait for the end of the program or
cancel the program withReset off.
"Cancel program",
▶
page 34
▶
Wait for the software update to
complete.
Unplug the appliance from
1.
the mains or switch off the
fuse.
Wait at least 2 minutes.
2.
Advertisement
Table of Contents
