Table of Contents
Advertisement
Malfunction
E:3200 or water supply
indicator is lit.
E:3400 lit.
E:6102 is on.
E:6103 is on. The water
is not pumped out.
Cause
The strainers in the water
connection of the supply or
AquaStop hose are
clogged.
Water flows continuously
into the device.
Drain pump is blocked.
Drain pump cover is
loose
Drain hose is clogged or
kinked.
Siphon connection is still closed.
Drain pump cover is
loose.
TroubleshootingNL
Troubleshooting
Turn off the device.
1.
Remove the plug from the socket.
2.
Turn off the tap.
3.
Unscrew the water connection.
4.
Remove the strainer from the inlet hose
5.
Clean the strainer.
6.
Place the strainer in the supply hose.
7.
Screw on the water connection.
8.
Check the water connection for
9.
leaks.
Put the plug back in the
10.
socket.
Turn on the device.
11.
Close the tap.
1.
Contact the "service
2.
department"→Page 64.
▶
Clean the drain pump.
"Cleaning the drain
pump", page 62
▶ Make the cover of the "drain
pump"→Page 62well fixed.
Route the drain hose without
1.
kinks.
Remove the remains.
2.
▶
Check the connection to the
siphon and open it if necessary.
▶ Make the cover of the "drain
pump"→Page 62well fixed.
49
Advertisement
Table of Contents
