Table of Contents
Advertisement
NLTroubleshooting
Malfunction
Insides of the appliance
are wet after the wash
cycle.
Food residue on the
crockery.
52
Cause
No malfunction. For
condensation drying, water
droplets in the rinse aid
container in the reservoir are
necessary and desirable. The
moisture in the air condenses
on the inner walls of the
device, flows downwards and
is pumped out.
Crockery is placed too close
together or the basket is
too full.
Spray arms cannot
rotate freely.
Spray arm nozzles are
clogged.
The seven are polluted.
The strainers are incorrectly
fitted and/or not secured.
Washing program too weak
chosen.
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
weak washing program.
Stubborn dirt cannot
be partially removed.
Tall, narrow pieces of
crockery are insufficiently
spread out in the corners.
flushed.
Troubleshooting
No action required. No action
required.
Arrange the crockery with sufficient
1.
space in between.
The spray jets must be able to
reach the surface of the
dishes.
Avoid touch points.
2.
▶
Arrange the dishes in such a way
that the dishes do not hinder the
rotation of the spray arm.
▶
Clean the "spray arms"
→
Page 47.
▶
Clean the sieves.
"Cleaning sieves", page 46
1.
Apply the sieves properly.
"Sieving System", page 46
Secure the seven.
2.
▶
Select a more powerful rinse
programme.
"Programs", Page 20
▶ Adjust the sensitivity of the
sensor system.
"Sensors", Page 13
▶
Only remove coarse food residues
and do not pre-rinse the dishes.
▶ Adjust the sensitivity of the
sensor system.
"Sensors", Page 13
▶
Do not arrange tall, narrow pieces
of crockery at an angle or in the
corners.
Advertisement
Table of Contents
