Table of Contents
Advertisement
Quick Links
Universal TechBox™ Series
THANK YOU
Thank you for purchasing a Universal TechBox™ UTB-A2-14 or UTB-HR-A2-14. Please read
these instructions thoroughly before installing or assembling this product.
PRODUCT FEATURES
• Convenient system protects equipment and may be mounted underneath furniture.
• Accommodates both 1 and 2 RU configurations.
• Available in full- and half-rack models.
• Lock mechanism for added security.
• Universal mounting system cutout on the bottom designed to accommodate small devices.
NOTE:
• This product is compatible with select Forward accessories.
• These instructions apply to both UTB-A2-14 (full-rack) and
UTB-HR-A2-14 (half-rack models).
Instruction Sheet
UTB-A2-14 and UTB-HR-A2-14
I-00772
Rev -
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Middle Atlantic Products Universal TechBox Series
Summary of Contents for Middle Atlantic Products Universal TechBox Series
- Page 1 Instruction Sheet Universal TechBox™ Series UTB-A2-14 and UTB-HR-A2-14 THANK YOU Thank you for purchasing a Universal TechBox™ UTB-A2-14 or UTB-HR-A2-14. Please read these instructions thoroughly before installing or assembling this product. PRODUCT FEATURES • Convenient system protects equipment and may be mounted underneath furniture. •...
- Page 2 National Electrical Code or codes administered by local authorities. All electrical products may present a possible shock or fire hazard if improperly installed or used. Middle Atlantic Products, Inc. electrical products may bear the mark of a Nationally Recognized Testing Laboratory (NRTL) and should be installed in confor- mance with current local and/or the National Electrical Code.
- Page 3 SUPPLIED COMPONENTS AND HARDWARE (CONTINUED) FOR RACKRAIL PAIR, BOX TOP, AND BOX BOTTOM (10x) 10 x 3/4” (8x) 10-32 x 3/4” (4x) 10-32 x 3/4” HTX Phil. Pan Head Thumb Screw Security Screw Wood Screw FACEPLATE LOCK (4x) Key (2x) 3/4-24 (2x) (Model No.
- Page 4 INSTALLING RACKRAIL AND THUMBSCREWS TO THE BOX TOP (CONTINUED) 2. Use (2x per side) thumb screws (C, pictured) or security screws (D) and partially attach them (approximately 3 full turns) on each side of the box top as shown. (FIGURE B) NOTE: Attach thumb screws or security screws to the box top based on your chosen 1 RU or 1 RU configuration as follows.
- Page 5 ATTACHNG THE BOX TOP TO THE UNDERSIDE OF YOUR FURNITURE (CONTINUED) FOR FULL-RACK MODELS ONLY: Use (4x) additional wood screws (E) through fixed holes and slots on the box top and into the underside of your furniture as shown. (FIGURE D) Box Top Slot (Shaded)
- Page 6 INSTALLING THE LOCK ON THE FACEPLATE (OPTIONAL) 1. If you are using the lock, use a hammer to carefully tap out the perforated hole on the faceplate as shown. (FIGURE F) NOTE: The 1 RU faceplate is shown. Perforated Hole 2.
- Page 7 rews (E) through slots in diag posite corners of your box to ATTACHNG THE FACEPLATE TO THE BOX 1. Attach the flange on the lower side of the faceplate inside the lip of the box bottom front, and then push the faceplate into place.
- Page 8 Factory Distribution United States: New Jersey, California, Illinois - Canada: Ontario - The Netherlands: Weert At Middle Atlantic Products we are always listening. Your comments are welcome. nts to your box Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.
Need help?
Do you have a question about the Universal TechBox Series and is the answer not in the manual?
Questions and answers