Mcube CubeScan BioCon-500 Service Training page 44

5. Troubleshooting 5. Troubleshooting 5. Troubleshooting 5. Troubleshooting
Green LED is not turned on with adapter being connected
No.
Is green LED not turned on even
1
when the system is OFF?
Is the 4 pin connector connecting the
Key Board and the Charge Board
2
connected?
3
Not solved yet?
Green LED is on when the system is
4 OFF, but it is turned off when the
system is ON.
www.mcubetech.co.kr
Check point Description
Yes ->Refer to item 2.
No -> Refer to item 4
Check the connection status and if
not connected, connect 4 pin
connector.
Replace the Charge Board.
No problem.
Because of charging control in
Control board sometime Green LED
is off when system is on.
-44-