Mcube CubeScan BioCon-500 Service Training page 30

3. System Setup 3. System Setup 3. System Setup 3. System Setup
Processing calibration
Step
7
www.mcubetech.co.kr
Screen Display Description
When there is any error during
calibration, the system displays
the following message in the
bottom part of the LCD screen.
*Common points to be checked in case *Common points to be checked in case *Common points to be checked in case *Common points to be checked in case
of calibration error. of calibration error.
of calibration error. of calibration error.
1) Check the water level. 1) Check the water level.
1) Check the water level. 1) Check the water level.
2) Check the position of a plastic jig in the 2) Check the position of a plastic jig in the 2) Check the position of a plastic jig in the 2) Check the position of a plastic jig in the
CalKit. CalKit. CalKit. CalKit.
3) Is there any air bubble in the water? 3) Is there any air bubble in the water? 3) Is there any air bubble in the water? 3) Is there any air bubble in the water?
4) The cover position of the CalKit is OK. 4) The cover position of the CalKit is OK. 4) The cover position of the CalKit is OK. 4) The cover position of the CalKit is OK.
5) The probe position in the probe 5) The probe position in the probe
5) The probe position in the probe 5) The probe position in the probe
-30-