Mcube CubeScan BioCon-500 Service Training page 15

3. System Setup 3. System Setup 3. System Setup 3. System Setup
Firmware Upgrade
Step
Install "CS_Maintenance
1
2 Execute "CS_Maintenance
3 Connect the device to the PC by using a USB cable.
4 Turn on the device.
5 Click "Setup
Click "Select File
6
7 Choose firmware file to be upgraded.
Click "Upgrade
8
(Must not be disconnected during upgrade.)
9 Remove the USB cable and Change to user mode after upgrade and
booting of the device is completed.
The scan data stored is deleted when the Firmware is performed
www.mcubetech.co.kr
CS_Maintenance" to a PC.
CS_Maintenance CS_Maintenance
CS_Maintenance". CS_Maintenance CS_Maintenance
Setup" in menu bar, and then click "Program Upgrade
Setup Setup
Select File..." button in the Dialog box.
Select File Select File
Upgrade" button in the Dialog box.
Upgrade Upgrade
Activity
Program Upgrade". Program Upgrade Program Upgrade
-15-