Dawn CONTROL-1500A Manual page 67

60
CONTROL-1500A Single Axis Antenna Controller
Appendix A1 Restoring Non-Volatile Memory
8. In this step, the positions of the geostationary satellites are stored in non-volatile memory.
Go to SETUP mode. Position the antenna on each of the satellites which were recorded in
step 3 above. Select the satellite name, enter the satellite longitude, and move the
polarotor to the recorded H and V positions in response to the appropriate SETUP mode
prompts.
DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com