Switching Unit On And Off - Planmeca ProX User Manual

6 Switching unit on and off

6 Switching unit on and off
8 Planmeca ProX
The on/off (1/0) switch is located under the generator box.
When the unit is switched on it will carry out an automatic self-test during
which the Display CPU software version is shown on the kV display, and the
Tube head CPU software version on the time display.
After the self-test is completed, the default exposure values (if set) appears
on the displays.
The default exposure values can be reprogrammed by the user, see section
"Programming exposure values" on page 23.
User's manual