Recommended Exposure Values For Cats Or Smaller Animals - Planmeca ProX User Manual

9.1 Recommended exposure values for cats or smaller animals

User's manual
The preprogrammed time (s), kV and mA values appear on the
respective displays (example below).
In the following sections, the recommended exposure values are given,
to help defining the exposure values.
• "Recommended exposure values for cats or smaller animals" on
page 17
• "Recommended exposure values for larger animals" on page 18
NOTE
It is possible to modify the default and preprogrammed exposure values,
for more information on programming the exposure values, see section
"Programming exposure values" on page 23.
4. If needed, you can change the preprogrammed exposure parameters
temporarily for the current exposure.
The preprogrammed time, kV and mA values can be temporarily
changed with the parameter adjustment keys. This will not affect the
preprogrammed values.
Select the parameter to be adjusted with the SELECT key.
• When the parameter value is flashing on the kV display, the anode
voltage can be changed with the parameter adjusting keys.
• When the parameter value is flashing on the mA display, the anode
current can be changed with the parameter adjusting keys.
• When the parameter value on the kV or mA display is not flashing,
the exposure time value can be changed with the parameter
adjusting keys.
NOTE
After adjusting the kV or mA value the unit will return automatically to the
time adjustment mode after 5 seconds time.
The following table shows the recommended exposure values for Planmeca
ProSensor.
NOTE
These values are for digital sensor.
9 Selecting exposure parameters
Planmeca ProX 17