Introduction - Planmeca ProX User Manual

1 Introduction

User's manual
The Planmeca ProX intraoral X-ray unit produces intraoral X-ray images for
the diagnosis of teeth and adjacent structures.
This manual describes how to operate the Planmeca ProX intraoral X-ray
unit equipped with Planmeca ProSensor digital X-ray system for veterinary
purposes.
NOTE
Read these instructions carefully before using the X-ray unit.
Note that if you use the Planmeca ProSensor digital X-ray system, you need
a workstation with a Planmeca Romexis imaging software to save, view and
modify the radiographs. The Planmeca Romexis software has a separate
manual, which should be used in conjunction with this manual.
CAUTION
FOR US USERS:
Federal law restricts this device to sale by or on the order of a health care
professional.
NOTE
This manual is valid for software revisions 4.00 or later.
NOTE
The Planmeca ProX intraoral X-ray unit is allowed to be used only under
supervision of a dental/health care professional.
The Planmeca ProX intraoral X-ray unit fulfils the requirements of Directives
93/42/EEC and 2011/65/EU (RoHS).
All key illustrations indicate that the key should be pressed or, where
indicated, pressed and held down. Pressing a key will either switch a
function on or off, depending on the original setting, or change the indicated
value.
The display values shown in this manual are only examples and should not
be interpreted as recommended values unless otherwise stated.
Make sure that you are fully acquainted with the appropriate radiation
protection measures and these instructions before using the unit.
1 Introduction
Planmeca ProX 1