Keys And Indicator Lights; Preprogrammed Settings Keys And Indicator Lights - Planmeca ProX User Manual

Beam limiting devices
kV display
12

8.2 Keys and indicator lights

8.2.1 Preprogrammed settings keys and indicator lights

User's manual
mA display Sensor type
A -
See the technical manual for DAP values of the 1, 2 and 12 beam limiting
devices.
The unit is preprogrammed with exposure parameters - time, kV and mA
values - which can be selected by pressing these keys. There are ten sets of
parameters for both the small animal mode and the large animal mode: one
for each exposure region and one for default exposure values, which are in
use when an exposure region is not selected.
The selections that can be made are:
1 Incisors
2 Premolars and canines
3 Molars
4 Occlusal exposure
5 Endodontic exposure
6 Bite-wing exposure
7 Large/small animal mode
Press the desired key once to select the projection of the maxilla. The
indicator light of the selected projection will come on. Press the key twice to
select the projection of the mandible. The indicator light of the selected
projection will come on.
Pressing the key a third time will recall the default exposure values.
The preprogrammed settings can be changed by the user, see section
"Programming exposure values" on page 23.
Explanation Part number
Rectangular tube -
without
supplementary
limiting device
Planmeca ProX
8 Control panel
13