Selecting Exposure Parameters - Planmeca ProX User Manual

9 Selecting exposure parameters

9 Selecting exposure parameters
Steps
16 Planmeca ProX
1. Check that the X-ray unit is in the desired imaging mode.
d. digital imaging mode
P. imaging plate metres imaging mode
0. film-based imaging mode
The imaging mode can be changed by pressing the MODE key for 2
seconds.
2. The indicator light of the selected mode will come on.
Select the large or small animal mode.
3. Select the exposure region with the preprogrammed setting keys.
Press the desired exposure region key once to select the projection of
the maxilla, and press the key twice to select the projection of the
mandible.
The indicator light of the selected projection will come on.
1 Incisors
2 Premolars and canines
3 Molars
4 Occlusal exposure
5 Endodontic exposure
6 Bite-wing exposure
User's manual