Warranty Obligations - Paton StandardMIG-160 User Manual

14. WARRANTY OBLIGATIONS

PATON INTERNATIONAL warrants that the source will operate properly if the user
follows the operating, storage and transportation conditions.
WARNING! There is no free warranty service if the welding machine is
mechanically damaged!
Machine model
StandardMIG-160
StandardMIG-200
StandardMIG-250
StandardMIG-270-400V
StandardMIG-350-400V
The main warranty period is calculated from the date of sale of the inverter
equipment to the end customer.
During the main warranty period, the seller undertakes, at no charge to the owner
of the PATON inverter equipment:
- To make a diagnostic and identify the cause of the breakdown,
- To provide the units and elements necessary for repair,
- To replace defective components and units,
- To test the repaired equipment.
The main warranty does not cover the equipment:
- With mechanical damage that affects the performance of the equipment (deformation of
the housing and parts as a result of falling from a height or falling of heavy objects on the
equipment, falling out of the buttons and connectors),
- With traces of corrosion, which caused the defective condition,
- Failed due to exposure of its power and electronic components to excessive moisture,
- Failed due to accumulation of conductive dust inside (coal dust, metal chips, etc.),
- In the case of an unauthorized attempt to repair its components and/or replace the
electronic elements,
- Depending on the operating conditions, it is recommended to remove the protective
cover and clean the internal elements and units with compressed air once every six
months to avoid the failure of the device. Cleaning should be carried out carefully,
keeping the compressor hose at a sufficient distance to avoid damaging the soldered
electronic components and mechanical parts.
The main warranty also does not cover damaged external parts of the equipment
that are subject to physical contact and accessories/consumables, which must be claimed
within two weeks of the date of sale:
- On and off button,
- Welding parameter control knob,
- Cable and hose connectors,
- Control connectors,
PATON StandardMIG DC MMA/TIG/MIG/MAG
Warranty period
- 100 -
5 years
3 years