Using SD memory cards
You can use SD memory cards to save and load
SCENE files and USER files. (Page 55)
Installing and removing the SD
memory card
Installation
1
Open the cover, and insert the card while
making sure it is oriented in the proper
direction.
Access lamp
L O
C K
2
Close the cover.
Removal
1
Open the cover, and check that the access
lamp is not lit.
2
Press the card further into the unit, grasp
the card, and then remove.
3
Close the cover.
Formatting SD memory card
1
Switch the MEDIA switch to "P2".
2
Set the POWER switch to ON. (Page 19)
3
Press the mode button and set it to MCR
mode (the MCR/VCR lamp lights).
4
Press the MENU button.
E-31
5
On the menu, select OPERATION, FORMAT
and then SD CARD. (Page 68)
• Select EXIT to cancel the formatting.
6
Select YES on the confirmation screen.
• The selected SD memory card is formatted.
You can also format from the SD CARD FORMAT
option on the CARD FUNCTIONS screen. (Page
113)
Cautions in using SD memory cards
• SD memory cards used with the AG-HVX200
should conform to SD standards. Be sure to
format cards using the AG-HVX200.
To format SD memory cards using a personal
computer, download the dedicated software from
the support site.
SD memory cards with the following capacity
(8MB - 2GB) can be used for the AG-HVX200:
8 MB
16 MB
256 MB
512 MB
For the latest information not available in the
Operating Instructions, visit the P2 Support Desk
at the following Web sites.
https://eww.pavc.panasonic.co.jp/pro-av/
• SD memory cards must not be used or stored in
an environment where they may be
Exposed to high temperatures/humidities;
Exposed to water droplets; or
Electrically charged.
• Be sure always close the cover when using an
SD memory card.
• You cannot use the SD memory card in the TAPE
mode.
TAPE
32 MB
64 MB
128 MB
1 GB
2 GB