Table of Contents
Advertisement
Audio input
The unit can record 2 channels of audio.
When the handle unit (
X2000
to the <INPUT 1>/<INPUT 2> terminals.
The audio to input to each channel can be switched to the built-in microphone, an external microphone, or a connected audio device.
Switching the audio input
∫ Audio recording format
The audio recording format such as compression format varies depending on the [FILE FORMAT].
[FILE FORMAT]
[MOV]
[MP4]
[AVCHD]
∫ Selecting audio input signals (When the handle unit is attached to the unit)
Selects the audio signal to record in the audio channel 1/audio channel 2.
A CH1 SELECT switch
B CH2 SELECT switch
CH1 SELECT switch setting
<INT/MIC (L)>
<INPUT1>
Using the built-in microphone/external microphone (stereo mini jack)
When an external microphone (stereo mini jack) is connected to the <MIC> terminal, audio switches from the built-in microphone to the audio input of the
external microphone connected to the <MIC> terminal.
∫ When the handle unit is attached to the unit
Make the following settings to switch to audio input from the built-in microphone or external microphone (stereo mini jack).
1
Set the CH1 SELECT switch to the <INT/MIC (L)> position.
The audio signals from <L> of the built-in microphone or the Lch of the external microphone connected to the <MIC> terminal are recorded to audio
channel 1.
2
Set the CH2 SELECT switch to the <INT/MIC (R)> position.
The audio signals from <R> of the built-in microphone or the Rch of the external microphone connected to the <MIC> terminal are recorded to audio
channel 2.
@
NOTE
0 To decrease the wind noise of the microphone, select the [AUDIO] menu [INPUT SETTINGS] [CH1 MIC LOWCUT]/[CH2 MIC LOWCUT] [ON].
Chapter 5 Shooting — Audio input
/
supplied,
optional) is attached to the unit, you can connect audio equipment or an external microphone
X2050
X1500
Linear PCM (LPCM)
AAC
Dolby Audio
CH2 SELECT switch setting
<INT/MIC (R)>
<INPUT1>
<INPUT2>
<INT/MIC (R)>
<INPUT1>
<INPUT2>
Recording format
™
Audio channel 1
Built-in microphone <L>/<MIC> terminal
Lch
Built-in microphone <L>/<MIC> terminal
Lch
Built-in microphone <L>/<MIC> terminal
Lch
<INPUT 1> terminal
<INPUT 1> terminal
<INPUT 1> terminal
- 124 -
Sampling rate/bit
48 kHz/24 bit
48 kHz/16 bit
48 kHz/16 bit
Input signal to be recorded
Audio channel 2
Built-in microphone <R>/<MIC> terminal
Rch
<INPUT 1> terminal
<INPUT 2> terminal
Built-in microphone <R>/<MIC> terminal
Rch
<INPUT 1> terminal
<INPUT 2> terminal
Advertisement
Table of Contents
