Output Sel; Video Out Setting - Panasonic AJ AJ-HDX900 Operating Instructions Manual

Chapter 7 Menu description tables

7-2-3 OUTPUT SEL

Variable
Item
range
OUTPUT ITEM TC For setting the characters superimposed on
STATUS the output signals from the VIDEO OUT
MENU connector.
ONLY TC:
Time codes are superimposed (when the
menu is accessed, the menu screen is
superimposed.)
STATUS:
The characters that are the same as the
characters
viewfinder screen are superimposed.
(When the menu is accessed, the menu
screen is superimposed.)
MENU ONLY:
The menu screen is superimposed only
when the menu is accessed. This
normally displays nothing.
For details, refer to "4-8-1 Settings of signals
output from VIDEO OUT connector."
C U F
MONI OUT HD-SDI For setting video signals output from the
HD-Y MON OUT connector.
HD-SDI:
For outputting the HD SDI signals
HD-Y:
For outputting the analog HD-Y signals
For details, refer to "4-8-2 Settings of signals
output from MON OUT connector."
C U F
MONI OUT CHARA ON For superimposing characters on the HD
OFF SDI output signals from the MON OUT
connector.
ON: To superimpose
OFF: Not to superimpose
<Note>
This does not link with the VIDEO OUT
CHARACTER switch.
C U F
MONI OUT MODE CAM For switching the signals output from the
VTR MON OUT connector.
CAM: The camera images are output at all
VTR: In the recording or other EE mode,
C U F
VF MODE CAM For switching the display mode of the
VTR viewfinder screen.
CAM: The camera images are output at all
VTR: In the recording or other EE mode,
C U F
The underlining in the variable range column indicates the setting in the preset
mode.
Remarks
superimposed in the
times.
camera images are output from the
connector; in playback mode, the
VTR's playback signals are output.
times.
camera images are displayed; in
playback mode, the VTR's playback
images are displayed.
(continued)

7-2-4 VIDEO OUT SETTING

Variable
Item
range
VIDEO OUT OFF
CENTR MARK 1
2
3
4
C U F R
VIDEO OUT OFF
SAFETY MARK 1
2
C U F R
SAFETY AREA 80%
:
90%
:
100%
C U F R
VIDEO OUT FRM ON
MARK OFF
C U F R
FRM SIG 4:3
13:9
14:9
VISTA
C U F R
VIDEO OUT USER ON
BOX OFF
C U F R
USER BOX WIDTH 1
:
13
:
100
C U F R
USER BOX 1
:
HEIGHT
13
:
100
C U F R
USER BOX H POS –50
:
+00
:
+50
C U F R
USER BOX V POS –50
:
+00
:
+50
C U F R
O The user box can be displayed in any position as a box-
type cursor.
O When the DOWNCON MODE item on the DOWNCON
SETTING screen is set to LT-BOX or S-CROP, the frame
marker and the safety marker are not displayed.
Remarks
For setting the center marker to be
superimposed on the output signals of the
VIDEO OUT connector.
OFF: The center marker is not displayed.
1: + (large)
2: Center blank (large)
3: + (small)
4: Center blank (small)
For setting the type of safety marker frame
to be superimposed on the output signals of
the VIDEO OUT connector.
OFF: The safety marker frame is not
displayed.
1: Box
2: Corner frames
For setting the size of the safety marker.
It is possible to set the size by units of 1%
with a fixed ratio between of width and
height.
For superimposing the frame marker on the
output signals from the VIDEO OUT
connector.
ON: To superimpose
OFF: Not to superimpose
For setting the frame marker.
The VISTA setting is 16:8.65.
For superimposing the user box on the
output signals from the VIDEO OUT
connector.
ON: To superimpose
OFF: Not to superimpose
O It is not superimposed when the VIDEO
OUT switch is set to the SD-SDI or VBS
position.
For setting the horizontal width of the user
box.
For setting the vertical height of the user
box.
For setting the horizontal position of the user
box center.
For setting the vertical position of the user
box center.
7
103