Monitor Out Setting; Rc Out Setting - Panasonic AJ AJ-HDX900 Operating Instructions Manual

Chapter 7 Menu description tables

7-2-5 MONITOR OUT SETTING

Variable
Item
range
MONI OUT CENTR OFF For setting the center marker to be
MARK 1 superimposed on the HD SDI output signals
2 of the MON OUT connector.
3 OFF: The center marker is not displayed.
4 1:
2:
3:
4:
C U F R
MONI OUT OFF For setting the type of the safety marker
SAFETY MARK 1 frame to be superimposed on the HD SDI
2 output signals of the MON OUT connector.
OFF: The safety marker frame is not
1:
2:
C U F R
SAFETY AREA 80% For setting the size of the safety marker.
:
It is possible to set the size by units of 1%
90%
with a fixed ratio between of width and
:
100% height.
C U F R
MONI OUT FRM ON For superimposing the frame marker on the
MARK OFF HD SDI output signals from the MON OUT
connector.
ON: To superimpose
C U F R OFF: Not to superimpose
FRM SIG 4:3 For setting the frame marker.
13:9 The VISTA setting is 16:8.65.
14:9
VISTA
C U F R
MONI OUT USER ON For superimposing the user box on the HD
BOX OFF SDI output signals from the MON OUT
connector.
ON: To superimpose
C U F R OFF: Not to superimpose
USER BOX WIDTH 1 For setting the horizontal width of the user
:
box.
13
:
100
C U F R
USER BOX 1 For setting the vertical height of the user
:
HEIGHT box.
13
:
100
C U F R
USER BOX H POS –50 For setting the horizontal position of the user
:
box center.
+00
:
+50
C U F R
USER BOX V POS –50 For setting the vertical position of the user
:
box center.
+00
:
+50
C U F R
O The user box can be displayed in any position as a box-
type cursor.
O When the DOWNCON MODE item on the DOWNCON
SETTING screen is set to LT-BOX or S-CROP, the frame
marker and the safety marker are not displayed.
The underlining in the variable range column indicates the setting in the preset
mode.
104
Remarks
+ (large)
Center blank (large)
+ (small)
Center blank (small)
displayed.
Box
Corner frames
(continued)

7-2-6 RC OUT SETTING

Variable
Item
range
RC OUT CENTR OFF
MARK 1
2
3
4
C U F R
RC OUT SAFETY OFF
MARK 1
2
C U F R
SAFETY AREA 80%
:
90%
:
100%
C U F R
RC OUT FRM ON
MARK OFF
C U F R
FRM SIG 4:3
13:9
14:9
VISTA
C U F R
<Notes>
O Settings in the SAFETY AERA item and the FRM SIG
item are interlinked with the respective connectors of
VIDEO OUT, MON OUT, and REMOTE.
O Settings in the respective items of USER BOX WIDTH,
USER BOX HEIGHT, USER BOX H POS, and USER
BOX V POS are interlinked with the VIDEO OUT
connector and the MON OUT connector.
Remarks
For setting the center marker to be
superimposed on the output signals of the
REMOTE connector.
OFF: The center marker is not displayed.
1: + (large)
2: Center blank (large)
3: + (small)
4: Center blank (small)
For setting the type of the safety marker
frame to be superimposed on the output
signals of the REMOTE connector.
OFF: The safety marker frame is not
displayed.
1: Box
2: Corner frames
For setting the size of the safety marker.
It is possible to set the size by units of 1%
with a fixed ratio between of width and
height.
For superimposing the frame marker on the
output signals from the REMOTE connector.
ON: To superimpose
OFF: Not to superimpose
For setting the frame marker.
The VISTA setting is 16:8.65.