Chapter 5 Preparation
5-4 Audio input signal preparations
Prepare to connect the audio components which will supply
the audio signals to the unit.
5-4-1 When using the front microphone
The microphone of the AJ-MC900G mic kit (optional
accessory) can be attached to the viewfinder.
1
Open the mic holder.
2
Attach the microphone, and tighten the locking screw.
Install the microphone by setting the
the top.
Locking
screw
3
Connect the microphone's connecting cable to the MIC
IN jack on the camera.
MIC IN jack
4
Set the AUDIO IN switch or switches to "FRONT" in
accordance with the audio channel or channels whose
sound is to be recorded.
86
(continued)
5-4-2 When using a wireless receiver
When using a UniSlot wireless receiver
indication to
UP
AUDIO IN
switches
1
Remove the slot cover, insert the wireless receiver, and
screw it down.
2
Set the AUDIO IN switches to WIRELESS for the audio
channels whose audio signals are to be recorded.