Configuring And Activating Interfaces - Nokia IP560 Installation Manual

4
Installing and Replacing Network Interface Cards
10. Insert and close the chassis tray assembly until it clicks into place.
The Nokia IPSO operating system automatically recognizes the NIC and
applies the original configuration to the new NIC.
11. Tighten the retaining screws that hold the chassis tray assembly.
12. Turn the power on.

Configuring and Activating Interfaces

The IP560 appliance automatically detects any new NIC when the appliance
is restarted. Use Nokia Network Voyager to configure and activate the logical
and physical interfaces on the NIC.
64
SL O
T 1
SL O
T 2
SL O
T 3
SLOT 1 SLOT 2
Chassis tray assembly retaining
screws
1
2
SL O
3 T 4
4
IP560 Security Platform Installation Guide
IP560
SLOT 3 SLOT 4
1
2
3
4
00519
00354