Barco ClickShare CSE-800 User Manual page 44

Getting started
1 2
Image 3–17
When the display mode is set to clone, if you are the fifth user who wants to share his screen, you are blocked.
A message appears on your screen telling you the maximum number of users being displayed simultaneously
has been reached. You can decide to wait until one of the four users removes his content from the display or
you can decide to show your content full screen. In that case, the four screens that were being displayed are
removed and your screen is displayed full screen.
For a meeting room with a dual display in span mode:
Wallpaper
Source 1
Source 1
Source 1 Source 2
Source 1 Source 2
Image 3–18
When the display mode is set to span, the sources are divided over both screens as shown in the drawing.
The sources are always displayed in a row and only four sources can be displayed.
To show your content on the display full screen
1. Click and hold the Button for 2 seconds.
Your content is shown full screen on the display. If other persons were sharing their content on the display,
their screens are removed. Their Button's LEDs are now shining white again.
Examples are showing the content for display mode set to clone.
44 R5900050 /13 ClickShare CSE-800
1 2
Source 2
Source 3
Source 3 Source 4