Table of Contents
Advertisement
Downloading Datalogs And Performing PC-Based Instrument
Configuration and Firmware Upgrades
The AreaRAE Plus/Pro communicates with a PC running Safety Suite Device Configurator
(SSDC) software to download datalogs, configure the instrument, or upgrade the instrument's
firmware.
Note: The most recent version of Safety Suite Device Configurator (SSDC) software is available
for a free-of-charge download at: https://explore.honeywell.com/safety_suite_device_
configurator.html#download .
1.
Use the supplied PC Communications Cable to connect the AreaRAE Plus/Pro to a PC.
2.
Turn on the AreaRAE Plus/Pro. Make sure it is running in Normal mode (with the main
measurement screen showing).
3.
Activate the PC communications mode on the AreaRAE Plus/Pro by pressing [N/-]
repeatedly, starting from the main measurement screen until you reach the "Enter
Communication Mode?" screen.
4.
Press [Y/+]. Measurement and datalogging stop, and the instrument is now ready to
communicate with the PC. The display now says "Ready To Communicate With
Computer."
5.
Start up the Safety Suite Device Configurator (SSDC) software, login, and detect the
instrument following the directions provided in the Safety Suite Device Configurator
(SSDC) User's Guide.
6.
Follow the instructions in the Safety Suite Device Configurator (SSDC) User's Guide to
download the datalog, configure the instrument settings, or update the AreaRAE
Plus/Pro's firmware.
7.
When you are done, press [Y/+] to exit the PC communications mode on the AreaRAE
Plus/Pro. The instrument returns to operating in Normal mode.
Always securely close the cover for the USB port when it is not in use. This keeps moisture and
debris out of the port.
AreaRAE
IMPORTANT!
98
User Manual
Advertisement
Table of Contents
