Datalogs - Honeywell BW MaxXT II User Manual

Datalogs

The detector records datalog samples that can be compiled to create a report using Safety Suite
Device Configurator (SSDC). From Safety Suite Device Configurator (SSDC), define how often
the detector records a datalog sample (1-120 seconds) in the Datalog Interval (seconds) field.
The detector is capable of storing 6 hours to 5 years of information, depending upon the datalog
interval and what information is stored. When the memory is full, the detector replaces the
oldest datalogs with the most recent datalogs.
The following information is recorded in a datalog:
Serial number of the detector
l
Date and time
l
Type of datalog
l
Detector status
l
Detector user
l
Type of gases the detector monitors
l
Gas readings
l
STEL and TWA readings (H
l
Alarm setpoints
l
Options enabled/disabled
l
Sensor status
l
Pump status
l
Logging intervals
l
Language detector is set to display
l
Calibrations performed
l
Bump tests performed
l
Battery readings
l
Temperature readings
l
BW MaxXT II
S and CO only)
2
83 User Manual