Battery; Charging - Honeywell AreaRAE Plus User Manual

Wireless multi-gas, multi threat detector
Hide thumbs Also See for AreaRAE Plus:
Table of Contents

Advertisement

Battery

Always make sure the battery is fully charged before using the AreaRAE Plus/Pro. Only use this
battery pack in the AreaRAE Plus/Pro (PGM-65XXX):
Standard-duration rechargeable Li-ion battery (PN: W01-3007-000 or W01-3007-100)
To reduce the risk of ignition of hazardous atmospheres, recharge, remove or replace the
battery only in an area known to be non-hazardous! Do not mix old and new batteries or
batteries from different manufacturers.

Charging

Note: Batteries should be charged in an environment where the temperature is in the range of
32° to 104° F (0° to 40° C).
Follow this procedure to charge the AreaRAE Plus/Pro:
1.
Remove the cover over the AreaRAE Plus/Pro's power port.
2.
Plug the AC/DC adapter's barrel plug into the AreaRAE Plus/Pro's power port.
AreaRAE
WARNING
44
User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arearae proPgm-6520Pgm-6560

Table of Contents