Table of Contents
Advertisement
Setting Wi-Fi Communication Parameters in Safety Suite Device
Configurator
Wi-Fi-equipped instruments' parameters for communication must be set in Safety Suite Device
Configurator (SSDC).
1.
Connect Wi-Fi-equipped instrument via USB to a PC running Safety Suite Device
Configurator (SSDC).
2.
Place the AreaRAE Plus/Pro in Communications Mode.
3.
From the main screen, press [N/-] until you see "Enter Communications Mode?"
4.
Press [Y/+].
5.
Select PC.
The message on the display should say "Ready To Communicate With Computer".
1.
Start Safety Suite Device Configurator (SSDC).
2.
Log in using your Administrator's password.
3.
When your Wi-Fi-equipped instrument is detected, click on its serial number.
4.
Click the Settings tab to view the current settings from the Wi-Fi-equipped instrument.
5.
Scroll down until you find "Wi-Fi" in the list.
You can now change settings for the Wi-Fi-equipped instrument. When you are done, click this
icon to send the new settings to the instrument:
AreaRAE
36
User Manual
Advertisement
Table of Contents
