Table of Contents
Advertisement
Note: The PWR150, PWR250, and PWR250-80 Power Supplies do
not support PoE.
Note: The maximum number of powered devices that the switches
can support simultaneously will depend on the power requirements
of the devices.
FAN10 Module
The FAN10 module is the cooling unit of the switch.
Here are the guidelines:
The module comes pre-installed in the rear panel of the switch.
The airflow direction in the switch is from front to back.
The fan module is field-replaceable and hot-swappable. You do
not have to power off the switch to replace it.
The switch automatically adjusts the fan speeds according to the
ambient temperature.
VCStack
™
The VCStack feature is used to manage up to eight x530DP
Switches as a single virtual unit. The switches synchronize their
actions so that switching operations (such as spanning tree
protocols, virtual LANs, and static port trunks) span across all the
ports and switches. Two advantages of stacks are:
You can manage multiple units simultaneously, which can
simplify network management.
x530DP Series Quick Installation Guide
Feature
5
Advertisement
Table of Contents
